|
|
|
PowerBox BaseLog
|
|
|
|
Features:
- Dual regulated output voltage
- User-selectable output voltage of 5.9 V or 7.4 V, software-variable using the SensorSwitch
- Informative graphic OLED screen with a resolution of 128 x 64 pixels
- Facility for connecting MPX and Spektrum downlink bus systems
- Direct transmission of both batteries' voltage and capacity to the transmitter
- Voltage display for each battery
- Residual capacity display for both batteries
- Minimum value memory for both batteries
- Large heat-sink area for high regulator performance
- Supports all currently used battery types: LiPo, NiMH / NiCd, LiFePo
- Suppression of possible servo feedback currents
- Various patch-leads (MPX / JR / Futaba, MPX / MPX) available, allowing the use of all receiver types
Specifications:
- Operating voltage: 4.0 Volt to 9.0 Volt
- Power supply:
2 x 2-cell LiPo battery, 7.4 Volt,
2 x 5-cell NiCd or NiMH batteries,
2 x 2-cell LiFePo battery (A123)
- Current drain:
Switched on: approx. 85 mA
Switched off: approx. 10 µA
- Dropout voltage: approx. 0.25 V
- Max. receiver and 2 x 10 A (stabilised), according to cooling measures
- Servo / receiver current:
Peak 2 x 20 A
- OLED screen resolution: 128x64 pixels
- Bus systems: Spektrum, Multiplex
- Temperature range: -30°C to +75°C
- Dimensions:
93 x 67 x 19 mm (incl. base plate)
- Weight: 88 g
- SensorSwitch: 15 g
- EMV approval: EN 55014-1:2006
- CE approval: 2004/108/EG
- Registered design: DE 203 13 420.6
This battery backer fulfils the EMV protective requirements, EN 55014-1:2006 with certificate dated 16 January 2010.
EMC approval 2004/108/EG.
Preis
€ 169,-
(Patch wire MPX/JR/Futaba)incl. VAT
plus carriage costs
Preis
€ 169,-
(Patch wire MPX/MPX)incl. VAT
plus carriage costs
 Top of page
|
|
|
 |
|
|
|
|
|
