|
The PowerBox Champion RRS is one of the most popular products in our range.
- with double linear regulation of the servo voltage
- with separate, double-regulated voltage for both receivers
- with double battery monitoring by means of LED chains
- with signal amplification for each servo socket
- with RF suppression for each servo
- with suppression of servo feedback currents
- with dual electronic switches (SensorSwitches)
- with twelve freely programmable servo sockets (three channels)
- with redundant receiver system (RRS)
- with informative LCD screen for receiver analysis
- with switchable servo voltage: 5.9 Volts or 7.0 Volts
Specification:
- Operating voltage: 4.0 Volts to 9.0 Volts
- Power supply: NiCd or NiMH batteries with five cells, two-cell LiPo battery, 7.4 Volts
- Current drain: 80 mA
- Voltage drop: approx. 0.25 V
- Max. receiver current: 2 x 1.5 A
- Receiver voltage: 5.0 Volts, stabilised
- Max. servo current: 2 x 20.0 A, according to the efficiency of the cooling measures
- Servo voltage: 5.9 V or 7.0 V, selectable, stabilised
- Servo sockets: 24 sockets, three match-channels
- Programmable servos: twelve
- Programmable parameters: servo travel left, right, centre, direction of rotation
- Redundant receiver system: seven channels
- Suitable types of modulation: PPM, IPD, PCM, SPCM, A-SPCM
- Suitable frequency ranges: 35, 40, 72 MHz, 2.4 GHz, Spectrum, FASST
- Temperature range: -10°C to +75°C
- Dimensions: 91 x 65 x 19 mm (including base plate)
- Weight: 135 grammes
- SensorSwitch: 15 grammes
Price
€ 449,-
(incl. SensorSwitch and Adjustor Board)
|
|
|
