|
Features:
- SRS - Serial Receiver System provides the ability to use receivers with a serial interface, such as those made by Spektrum DSM2 and DSMX, Multiplex M-LINK, Futaba S-BUS, Jeti R_SAT, HoTT, Weatronic.
- Unrestricted channel assignment of the PowerBox outputs
- Integral high-resolution graphic OLED screen with 128 x 64 pixels
- Particularly user-friendly menu-based programming using the SensorSwitch
- Signal amplification and interference suppression for 14 channels and 18 servos
- Synchronised servo output for totally synchronous servo response
- Flight recorder: records Lost Frames and Fail-Safe periods for all receivers connected to the backer
- Variable frame rate, range 9 ms - 21 ms
- 16-bit processor for fast, high-resolution signal processing
- Four match-channels, each for two servos. Accurate adjustment of all eight servos
- Double regulated output voltage for receivers and servos
- Can be connected to Spektrum and Multiplex MSB, Hott Weatronic downlink channel bus systems
- Direct transmission of battery voltages and capacities to the transmitter
- Separate voltage and capacity displays for each battery
- Software-selectable servo voltage: 5.9 V or 7.4 V
- Minimum value memory displays any voltage collapses
- Large-area heat-sinks for high regulator power
- Regulator monitor, regulator malfunction indicator
- Support for three battery types: LiPo, NiMH / NiCd, LiFePo
- Suppresses any servo feedback currents which might develop
- Updateable with PowerBox Systems USB Interface connectors
Specification:
- Operating voltage: 4,0 Volts to 9,0 Volts
-
Power source:
2 x two-cell LiPO batteries 7,4 Volts
2 x five-cell NiCd or. NiMH batteries
2 x two-cell LiFePo batteries (A123)
- Current drain:
switched on - approx. 125 mA
switched off - approx. 33 µA
- Dropout voltage: approx. 0.25 V
- Max. receiver and servo current:
2 x 10 A (stabilised) according to cooling , Peak 2 x 20 A
Servo signal resolution: 0.5 µs
- Servo signal resolution: 0,5µs
- Signal repeat rate:
9 ms, 12 ms, 15 ms, 18 ms, 21 ms (frame rate)
- Screen: OLED 128 x 64 pixels, graphic
- Servo sockets: 18Sockets, 14 channel
- Temperature range: - 30 °C to + 75 °C
- Weight: 115 g
- SensorSwitch: 15 g
- EMV approval: EN 55014-1:2006
- CE approval: 2004/108/EG
- WEEE Reg. No.: DE 639 766 11
This battery backer fulfils the EMV protective requirements, EN 55014-1:2006 with certificate dated 10 February 2011. EMC approval 2004/108/EG.
 ... more information about the PowerBox
Competition SRS
Notes regarding the different bus systems
(PDF 1.03 MB)
Operating Instructions Italian (PDF 253 KB)
Test report PowerBox Competition SRS, in RC SPORT (PDF 1.38 MB)
Info PowerBox Competition SRS (PDF 1.03 MB)
Test reports PowerBox Competition SRS (PDF 584 KB)
Test reports PowerBox Cockpit SRS and Competition SRS(PDF 1,08 MB)
Price incl. Sensorswitch
€ 349,-
incl. VAT
plus carriage costs
 top of page
|
|
|
