The PowerBus™ to PWM Adapter is used for servos which are not fitted with a bus decoder. In this case the channel assignment is defined at the PowerBus™ to Bus Adapter. The bus signal is decoded in the adapter, which then generates conventional PWM signals for the servos. This unit allows all known makes of servo to be operated with the PowerBus™ system. As with the other adapters, all the outputs are protected against short-circuits both in the signal wire and the power supply wires. The adapter includes integral signal amplifiers for all servo outputs as well as the adapter’s PowerBus™ output. This means that as many bus adapters as required can be connected in series, i.e. cascaded.
|
Technical Data
|
Product description
|
||||||||||||||||
|
PowerBus from PowerBox Systems
Short PowerBus introduction
PowerBus from PowerBox Systems (Part 1)
A short introductory video on the new PowerBus
PowerBus from PowerBox Systems (Part 2)
PowerBus from PowerBox Systems (Part 3)
|
Downloads
|
Reviews
|
PowerBus™ cable is manufactured specially for PowerBox Systems, is extremely flexible, and is made up using very thin individual strands
|
Splitter, to extend one PowerBus lead into two
|
Quadruple distributor for S-Bus - enabled servos
|
PowerBus™ cable is manufactured specially for PowerBox Systems, is extremely flexible, and is made up using very thin individual strands
|