Industrial
PowerBox Engine Manager Pro
Description
Data
Features
Set contents
Downloads
Description
The Engine Manager Pro handles all tasks related to controlling and monitoring a petrol engine. Its primary functions include switching and power supply for up to two ignitions. The ignition can be supplied with up to 35V, while the output can be set to 6.0V, 8.0V or 12.0V. A double LC filter and overvoltage protection completely decouple the ignition supply from the rest of the on-board electronics.
In addition, three servo outputs are available, which are controlled via the CAN bus input and/or the RC bus input. These can be used to control the throttle, choke flap or starter motor, for example. The CAN bus and RC bus are linked in such a way that if one system fails, the other automatically takes over control.
The telemetry data available includes speed, 4× temperature, voltage and current of the ignition input. A flow sensor can be connected via the P²-BUS input as an option, which can also be used to measure the remaining tank content.
All telemetry data is available via DroneCAN and the RC protocols P²-BUS, EX-BUS and S.BUS2.
Parameterisation can also be carried out via DroneCAN, the aforementioned RC protocols or the Mobile Terminal (Order No. 9025). The Mobile Terminal can also be used to perform updates, save settings and transfer them to other devices.
Data
| Operating voltage | 6,0 bis 35,0 V |
| Current drain Power-on state | 25 mA |
| Ignition standby consumption | 0,1μA |
| Ignition max. current | max. 2,5A |
| Output voltage | 6,0 V / 8,0 V / 12,0 V |
| Signal input | DroneCan, P²-BUS, EX-BUS, S.BUS2 |
| Supported telemetry systems | DroneCan, P²-BUS, EX-BUS, S.BUS2 |
| Telemetry data | Drehzahl, 4x Temperatur, Spannung, Strom, optional Durchflussmenge |
| Temperature measuring range | 0 - 250°C |
| Speed measuring range | 100 - 12000 U/min |
| Parameter settings | CAN-Bus, RC-Bus oder Mobile Terminal |
| Dimensions | 57 x 62 x 12 mm |
| Weight | 40 g |
| Temperature range | -30°C bis +85°C |
Features
+ Control for two ignitions
+ Input voltage up to 35V
+ Output voltage selectable between 6.0V/8.0V/12.0V
+ Effectively suppresses interference from the ignition
+ Control via DroneCan and/or P²-BUS/EX-BUS/S.BUS
+ DroneCan/RC bus operate as redundant signal sources
+ 3 servo outputs for throttle/choke and starter motor
+ Telemetry for DroneCan and P²-BUS/EX-BUS/S.BUS2
+ 4x temperature, speed, current/voltage
+ P²-BUS connection for additional external sensors
+ Updateable with the Mobile Terminal
Set contents
+ PowerBox Engine Manager
+ 6x fixing screws
+ 4x rubber grommets and brass sleeves
+ Operating instructions in English and German
